(856) 292-3194
Cart | Wishlist | User Profile

SECURE SHOPPING Our site is tested by TWO services every day to protect your information.

McAfee SECURE sites help keep you safe from identity theft, credit card fraud, spyware, spam, viruses and online scams


We are an authorized retailer for everything we sell - we do not use unathorized or "shady" sources.
Gollihur Music is a LBGQT+ Friendly Business   Gollihur Music

Accessories for Upright BassBass Wheels

Upright Bass Wheel Glasser solid rubber (with Option for Brake Upgrade)

         Manufactured by: Glasser

You've got options! Click the drop-down to choose (prices starting at $45.00)
Choose Model:
-- Select Special Order Sizes of Glasser Upright Bass Wheels

Shipping Cost: Starts at $7.50 to most East Coast destinations
     Log in, or add this item to your cart to see actual shipping costs to your state or country.
     (You can easily remove it if you change your mind.)

California Residents: Please view our Proposition 65 Message

Glasser wheel A wheel is a convenient way to make moving your bass around a LOT easier on your back. This nicely-made wheel from Glasser has a solid rubber "tire" on a spoked, ball-bearing-ed (is that a word?) wheel. The tire is of a similar material to what's used on rollerblade wheels, so it has nice grip in the corners, and it's 6 inches in diameter, so it rolls very smoothly over minor bumps and terrain. It doesn't have a lot of "give," like a pneumatic (blow up) tire would, though - so no jumping off the curb!

Shafts for upright basses can vary in size, and often endpins are upgraded or replaced, so measure carefully - don't assume! Returns are a pain in the nether regions for everyone. However, one version of this wheel does have one special option that none of our other wheels do - a built-in foot-operated BRAKE.

So if you're playing a bluegrass festival, or you're a traveling bassist - or even, dare I say it, as a Philly-area native, a Mummer - you could even step on the brake and play the bass on the wheel, then move on to the next jam circle without a lot of fussing with endpins and such. The brake is made of a strong metal bracket and spring with a durable plastic footpad.

Just like our other wheel models, it's a NO SWIVEL WHEEL!! Wheel direction can be adjusted to your preferred orientation. If it rotated you could not control the bass while rolling it! The shaft has a flat side; you adjust the position of the nuts on each side of the bracket so it is in the right position for the set screw in your endpin receiver. I like to set the wheel so my bass rolls sideways. I lean the neck on my shoulder, grab the bout and lean over to steer! The shaft is secured to the wheel assembly by two nuts, to ensure that it stays put - and the wheel rides on a pair of sealed ball bearings for a smooth, effortless ride.


  1. You MUST measure! It's important to have the correct size to avoid damaging your endpin receiver - that's a costly replacement!

  2. Okay then, how do I measure? The best way is with a caliper (see example at right), which allows you to accurately measure the diameter of your existing shaft. If you don't have one, a set of standard and metric open-end wrenches can act as a gauge - use the wrenches in the various available shaft sizes to determine which one exactly fits the pin diameter. Don't have those, either? Get a piece of stiff cardstock or cardboard, and cut a notch in it. Continue to slightly widen that slot until the endpin fits perfectly - then measure the gap. Do the measurement with both inches and millimeters; as you can see, shafts are available in both metric and SAE (inches) sizes, and some of the sizes are very close.

  3. I don't have a metric (or SAE) ruler - now what? Check out this page for some printable rulers that might help.

  4. What if my endpin shaft won't come out?? Many endpins have a pin stop that prevents the shaft from being removed from the bass. In most cases you can shove the pin into the bass, retrieve it through the f-hole, and remove the crossbar or other piece that is preventing removal.
  5. This wheel is designed to fit the conventional endpin collar, those with a set-screw that is screwed through the wall of the collar to the inside, where it contacts the flat part of the wheel shaft insert. This wheel shaft will not work if your endpin is a different type, such as shown in the photo at right.

Is this product returnable? Click here for our return policy.
Is there a Factory Warranty? Click here to find Warranty Information for all of our manufacturers.
International customer? Click here for important information about ordering from outside the USA, and what to expect concerning taxes, VAT, delivery times, and more.

Check Out the FAQ Resources That Apply to This Product:
   WHEELS: Upright Bass Wheels

Related Products

Upright Bass Buggie Bass Transporter (Bass Buggy)
Upright Bass Buggie Bass Transporter (Bass Buggy)

This item is made in USA!The popular Bass Buggie allows you to transport your bass with the ease of wheeling a hand truck - with dual ball-bearing wheels and easy, no-tools adjustment and installation...

From $120.00

Gaines Upright Bass Transport Wheel
Gaines Upright Bass Transport Wheel

This item is made in USA!Baby your bass! Clearly superior with its fully pneumatic, adjustable, and replaceable tubed tire...

From $149.00