Our site is tested by TWO services every day to protect your information.
PREAMPS: Do You NEED a Preamp with Your URB Pickup?
$100 OFF a new Doubleshot Combo Rig (Limited Time!)
Early adopters of the Acoustic Image DOUBLESHOT COMBO rigs
get $100 off if ordered before September 1, 2019
. Details are on the Doubleshot page
.Please note that the Doubleshot is a brand new product; once they start shipping, stock will be limited and often pre-sold, and we are suggesting that you pre-order ASAP in order to get one as quickly as possible.
PRICE DROP on Chuck Israels Mic!
The price on the Chuck Israels Signature Bass Microphone
just dropped by $150! Specially designed just for upright bass, it provides amazing sound for live and studio work. Thanks to favorable currency exchange rates, we're able to offer the mic at a substantial discount. Get it while it's hot!
Innovation Strings are now part of the GHS Strings family!
May, 2019 - Innovation Strings
, formerly of the United Kingdom, has been acquired by US string company GHS
. The two companies have been working on this acquisition process for several months, and it has ultimately involved a complete stoppage of production while they were moving all winding equipment, supplies, and materials across the Atlantic to the Michigan headquarters of GHS.
While the fine folks at GHS are calibrating the winding machines, working out the string "recipes," and training staff, the Innovation strings may be a little tough to get a hold of, as the existing stock made previously in the UK has been selling out at most music stores.
At Gollihur Music, we were aware of these changing circumstances, and were able to "buy in" heavy for most of the Innovation strings. As such, we have most Innovation String Sets IN STOCK
- except for a few exceptions; you can check each page for specifics on whether the strings you want are available. We anticipate that new strings will be available by around mid-June - and we're getting some of the first new sets made.
You might, but you might not. It depends on several factors.
First off, do you already have the amp you intend to use with your bass? If you are in the market for an amp, you can make some choices while shopping that can have an impact on whether you will need a preamp.
Starting with the Basics:
If you are like most of us, you are using a piezo-electronic transducer
for a pickup. That means you have a small ceramic-encased "sensor" that captures the vibrations created by the strings, turns those vibrations into electrical impulses, and sends them through the cable to an amp. The amp reverses that process, turning those impulses back into vibrations on the speaker of the amp, which makes sound waves and projects them into the room.
A preamp can further "improve" those electrical signals from the pickup -- boosting their levels, allowing for changes to the sound (using equalizers, etc.) -- and, in the case of the type of pickup (piezo-electric) in the bass, creating an ideal "buffer" (a sort of electronic "liaison") between the instrument and amplifier. But this buffer could be built into the amp, if you choose that amp wisely, which may negate the need for an "extra" preamplifier or effects unit.
The "buffer" I speak of is related to electrical resistance
, which is (in layman's terms) the degree in which the amplifier's circuit "resists" the pickup signal. The level of resistance (called input impedance
) can radically change how a pickup sounds -- when a pickup is well paired to its preamp or amp, the result can sound full-bodied, natural, and open. That same pickup and amp, with the "wrong" level of buffering, can sound "quacky" or thin, or completely out of whack.
Put simply, when you plug your pickup into an amplifier, it becomes part of one big cooperative circuit. If the loading (amount of resistance) is not optimal for the type of pickup, problems result. The reason that this happens - without getting too technical - is because a "non-optimal" resistance load creates a sort of unintentional (and usually undesired) filter which may decrease the level of certain frequencies. Now, a controllable filter can be useful (see our FAQ on amp features
for details on notch filters and low-pass filters). But when it's unintentional and uncontrollable, it can make for rather odd sound -- that brittle, raspy, all highs and no lows sound that makes you think you have a bad pickup.
Sound-wise, it's kind of like having fancy tone controls on your car stereo; but you turn it on only to realize that your 3-year-old has completely skewed the knobs to crazy new settings. And now, although the stereo system still makes music, now it sounds rather out-of-whack.
So, the idea is to "match" your amp to your pickup - to ensure that the load presented by the amplifier's input is optimized for the pickup you're plugging into it, which avoids this unwanted filtering effect.
Here are three common, simplified, impedance values:
- Low impedance: (like condenser mics and higher quality mics with XLR connectors (three pins inside a circular shell) match best with an input around 600 ohms.
- High Impedance: Most bass amplifier inputs usually aim for around 50,000 ohms, which is considered "high impedance" -- electric guitar/bass pickups (and many instrument-level signals) are designed to be compatible with that input impedance.
- Ultra High Impedance: Piezo transducers sound best when their input load is within the 1-10 million+ ohms (1-10 megohms) range.
|Hey, there are lots of preamp choices! Some have 1 megohm input impedance, while others have 5, or 10, or...
Is higher better?
We consider 1 megohm to be a practical minimum level for mating a piezo pickup to a common amplifier. An input impedance of 5 or 10 megohm (for example) CAN be "better," but isn't always, necessarily, because every pickup has a different impedance of its own, and a different gain structure, etc. So aiming for a higher impedance input might make things "better" sounding, but it might not.
Straight Dope: If there was a magical input impedance that always sounded best, all of the buffering preamps would spec that impedance.
That said: on average, I can say that the higher - up to 10 meg - does *usually* have a more transparent and open sound that doesn't need "corrective" EQ to sound good. But once you're in the appropriate range (above 1 megohm), the differences are rarely profound, and are usually subjective; so you probably just want to shop more based on budget, and feature set.
So, if you're still amp shopping, it might be wise to consider an amp that has the buffering built-in, like the amps by Acoustic Image, EA, and other brands that specialize in acoustic instrument amplification. Choosing your amp with that in mind might mean not having to add an additional piece of gear to your signal chain. For what it's worth, we don't sell any amplifiers that do not have an input impedance of at least 1 megOhm. After all, we're an upright specialist, so ALL of our amps are suitable for basses with piezo pickups on them.
If you already own an amp, and its input impedance is too low to handle your double bass pickup - don't worry, that doesn't necessarily mean that you need to buy a new amp. That's the whole point of buffering preamps
. A preamp will literally act as a "buffer" (sort of a "middle man") - providing the ultra-high impedance input that the pickup needs, and then actively converting
the signal into an impedance that your amplifier can handle without mucking things up.
So if your pickup sounds "quacky", "thin," or otherwise "lousy" (that's a technical term) you may not need a new pickup or amp -- you might just need a buffering preamp. Especially if you can sort of
improve the sound by EQ'ing it to death. See my FAQ on OHMS & IMPEDANCE from the INPUT perspective
for further details.
How do I know if this is my problem?
Check the specs (if available) for your amp. But it's almost a given that most "Bass Amplifiers" are originally designed and built for use with bass guitars
, which use magnetic
-based (most common) and similar acoustic instrument pickups are rather different from those magnetic pickups, in that they react differently to low impedance values.
Summing it up:
Here are some reasons why you should have or should consider using a preamp between the pickup and amplifier:
- the input impedance specification of your amplifier is under 1 megohm
...also expressed as 1,000,000 ohms or 1Mohm; being close to that value, like 800K, is usually ok. This is probably the most common reason for using a preamp.
- there are features available from the preamp that are not on your amp, that can enhance or help with problems
...like more precision or flexible tone controls, phase reversal, a DI output, high pass filter, etc.
- you want/need a convenience volume control (and tone controls?) close to you, for when your amplifier is not at your feet
since at higher volumes you will likely need to place the amplifier further away from you, so avoid feedback and other undesirable sounds
- your pickup's output is very low, so you need a preamp to increase its signal level to better match your amplifier
The Bottom Line:
- Even with an amp that seems to handle the ultra-high impedance of a piezo pickup, I often like the buffering effect of a preamp, and I think in most cases they are necessary for the best and most realistic-sounding results. They can also give you convenient control of volume and tone without having to move towards your amp, which can cause feedback problems depending on volume.
- I have experimented and found the Bass Max can be more "acceptable" without a preamp, but the Double Big Twin really benefits/needs a preamp for best results. Acceptable? that's a call you'll have to make - if you buy without a preamp, try to borrow one to try.
- We've also experimented with the K&K Twin Spot on Bob's old '27 "the gibson" tenor guitar, and while it is more acceptable than the bass pickup experience (it's tuned very high), the warmth and improved character that a preamp adds confirms my personal decision to never plug into an amp without one, unless it is designed to handle the ultra-high impedances of piezo-based pickups.
- Some "stomp boxes," when not in bypass mode (turned off) and other preamps may be ok; check the input impedance specification of your device. If it is 1 megohm or higher, it should do the buffering/matching job.
Unless you have one of those special amps that are designed to accommodate piezo pickups, I suggest that you use some sort of buffering preamp with any
piezo pickup, or you likely won't be getting everything these and other pickups have to offer.
Products Related to This FAQ
The Fine Print:The information contained herein is based on what's in my brain — and/or my observations and opinions from my personal experiences (and those of Bob, before me) — as of this moment today, and is subject to change. I'm sure that a great deal more information and detail could be added — but the intent of these writings is to present easily understood, quick FAQs, to address common questions and improve the reader's general knowledge.
What's written here is by no means any kind of authoritative absolute answer, for I am not the world's greatest authority on bass (not even close), or on much of anything else, for that matter. So, by all means, get a second opinion, and know that all the information provided here is for general informational purposes only. I am not providing professional advice; be aware that, where applicable, any information acted upon is at your own risk.
I simply and sincerely hope the information and opinions here are helpful to you on your quest for knowledge about the bass and related subjects... that's the point!
I welcome email with dissenting and additional viewpoints/information/updates that help improve my personal awareness and these content pages. If you have a question that you think belongs here, please let me know.
PS: It should go without saying that all of the information here, unless otherwise attributed, was expressly created by us for the benefit of our customers. All graphics, text, data, and other information is copyrighted © 1995-current. You are not permitted to re-use any text, information, or graphical elements on your own website; you may post links to it, or small excerpts, on message boards if properly attributed and linked back to our pages.