Cables:  Audio Cables

Preamps and Processors:  Accessories

Preamp Mounting Kits for small K&K Preamps

Manufactured by: Gollihur Music

Get a kit which contains everything you need to mount your compact K&K preamp to your tailpiece - without any modifications to your valuable instrument! Having the preamp mounted to the bass makes setup a breeze - just plug and play! It also means that you have a volume control on your instrument - a big deal if you've ever had to lug the doghouse over to the amp to make adjustments.

Consisting of high-quality components, this kit includes complete, illustrated instructions and can be applied by most anyone - in less than 15 minutes. The included cables are top-shelf, made with high quality cable and connectors.

Please be sure to get the correct kit for your application; see the diagram to the right to determine which version you need. If you're getting a 2-channel system like the Bass Master Pro, Bass Master Rockabilly Plus, or one of the Golden Trinity Mic sets, you need the STEREO/2 Channel version. If you get the wrong kit, your pickup and preamp setup may not work properly. Details and photos of the mounting kits are below.



MONO (1 CHANNEL, SINGLE PICKUP) Mount Kit: Use this kit for single-channel systems; for instance, the pickup of your choice and a K&K Power Pack or Pure Preamp. If you're using a Dual Channel Pro (not "ST" version) preamp with two individual pickups, use the "DUAL MONO" version, below. This kit includes a high-quality Mono (single channel) cable, foam isolation square, and hook-and-loop strap to mount the preamp.

DUAL MONO (2 INPUT CHANNELS, 2 SINGLE PICKUPS) Mount Kit: Use this kit with two independent single-channel pickups plugged into the two separate input jacks on a Dual Channel Pro (not "ST" version) Preamp or similar; if you've created your own "Rockabilly" setup by combining the "clicky" pickup and the dual channel pro with a pickup you already have, this is the right way to go. You're basically getting the MONO KIT, above - plus an additional 12 inch cable for the second pickup. This kit includes 2 high-quality Mono (single channel) cables, foam isolation square, and hook-and-loop strap to mount the preamp.



STEREO (2 CHANNEL, 2 PICKUP) Mount Kit: Use this mounting kit for the Two Channel K&K Pocket-Sized preamplifiers. This kit includes a high-quality TRS (Tip/Ring/Sleeve) cable, foam isolation square, and hook-and-loop strap for mounting a small 2-channel preamp to the tailpiece of your double bass. It also includes a full set of instructions. This kit is compatible with the Dual-Channel Pro ST preamp, as well as with the following pickup systems:

• Bass Master Pro
• Bass Master Rockabilly (discontinued)
• Bass Master Rockabilly PLUS
• Golden Trinity Upgrade System
• Golden Trinity with Bass Max
• Golden Trinity with Double Big Twin

Fishman B-II Bass Instrument Preamplifier

Rugged, simple to operate, the B-II is specially tailored for acoustic basses. Great if you don't need the bells and whistles of the Pro-EQ Platinum...

Instrument Cable: 1 Foot cable with ¼ ends (mono or stereo)

12 Inch INSTRUMENT CABLE with two 90 degree ¼ inch connectors - select mono or stereo version. We carry these special cables so you can mount a K&K Sound or other small preamp on your tailpiece...

K&K Bass Max or Double Big Twin Pickup/Preamp Package

Combine the Pure Preamp from K&K with either the Bass Max or Double Big Twin URB pickup - and get a free preamp tailpiece mounting kit and cable!

K&K Sound Bass Master Rockabilly Separate Components

For the ultimate "everything's included" Rockabilly Pickup set, check out the Bass Master Rockabilly Plus main page; if you already have a bass pickup that you prefer, each piece is also available separately for your convenience.