Amplifiers & Speakers:  Amplifier Heads

EA Micro 300 Musical Instrument Amplifier

Manufactured by: Euphonic Audio

The US made, EA iAMP Micro 300 is a tiny but powerful amp. At around three pounds, this Class D amp will deliver 300 watts into a four ohm load. It offers two channels with independent three-band equalization, and when using one input only you can switch from one channel to another using a footswitch! (not included)

EA has wisely addressed the sometimes questionable power levels we encounter on the stage from hell (I've been there, and I'll bet you have, too). Their 4" by 4" Switching Power Supply features true Power Factor Correction from 100-240 volts and from 50-60 Hz, so if you're caught in a low voltage situation at the end of a pier in NJ (happens to me!), the Micro 300 can still deliver a cool 300 watts (@ 4ohms), even down to 100 volts.

The power amp of the Micro 300 is based on the proven Class D power amp technology of the iAMP 200 (Wizzy Combo). This power amp's highly efficient design means neither cooling fan or external heat sinks are necessary.

All this and more in a package weighing around 3 pounds and the size of a 1/2 sheet of paper!

• Inputs: Two separate and distinct channels with individual controls.
• Trim controls to adjust the overall level of channel one, channel two, and the DI output
• Intelligent Input Switching with optional footswitch; you can use a single or double momentary contact footswitch
  
  • With one instrument plugged in, the switch toggles the instrument between channel one and channel two, so there can be different settings
    
  • with two instruments plugged in, the switch moves from channel one » channel two » both
  • a single footswitch controls the Intelligent Input Switching; when a double (¼" TRS plug) switch is used, the second button controls the mute function
• Controls: Channel switch, Input gain, 3-Band EQ, Master Volume, Mute switch, Effects loop blend
• EQ: Low, Mid, and High for each channel
• Effects Loop: Parallel effects loop with blend control
• Internal (computer style) jumpers control...
  
  • Effects loop is inserted in
    • Channel One only
    • Channel One and Two are both affected (default)
  • choose between pre- and post-EQ for the DI output (default: set to pre-EQ)
  • choose what signal is muted by the footswitch
    
    • speaker output and tuner output muted
    • speaker output muted only (default)
• Outputs: Speakon speaker, tuner, effects send, 1/4" stereo balanced DI out
• Frequency Response: 20Hz to 20kHz ± 3dB
• Power Output: 300 watts @ 4 ohms; "About 175 watts @ 8 ohms" per EA
• Size: 2.1"H x 8.5"W x 5.4"D
• Weight: Around Three Pounds!

EA Backpack for Micro 300 and Wizzy 10

This cool gig system for the Micro 300 and Wizzy 10 has room for the cabinet, head, cables - and you can wear it on your back!

Euphonic Audio Wizzy 12 Speaker Cabinet

The Wizzy's design incorporates a custom Euphonic Audio twelve-inch driver with a whizzer cone to handle the higher frequencies...
• rated at 200w • 4 ohms • 103dB @ 1m • 17Hx17Wx12.5D inches • approx 29 lbs.

Euphonic Audio Wizzy 10 Speaker Cabinet

A smaller and lighter version of the original Wizzy 12. Less than 20 lbs., this compact cab with a ten inch driver makes an ideal companion to the new 2.5 lb. Micro 300 amplifier...
• rated at 250w • 4 ohms • 101dB @ 1m • 15Hx12Wx11D inches • approx 18 lbs.

Euphonic Audio Wizzy 12 MLINE Speaker Cabinet

The MLINE version of the Wizzy 12 employs a specially-engineered transmission line cabinet to provide a deeper sound from a compact speaker...
• rated at 250w • 4 ohms • 101dB @ 1m • 15.6Wx19Hx12.5D inches • approx 34 lbs.