Pickups for other instruments:  Banjo

K&K Banjo Twin Musical Instrument Pickup

Manufactured by: K&K Sound

Banjo Twin
The Banjo Twin pickup system is designed to reproduce the true banjo sound - with very natural tone quality, and with very little effect on the acoustic tone.

The Banjo Twin does not require any alteration of your valuable instrument; all the components are installed with special double side tape or self adhesive fasteners. These will not harm the finish of your instrument and residues can be easily removed.

The Banjo Twin works well in passive mode, especially if acoustic instrument amps are used. If a preamp should be necessary, we recommend the Pure Preamp.

The two pickups are installed on the inside of the banjo head using a special removable self-adhesive fastening system, specially designed for the installion on the banjo head. This adhesive is installed to the two outer edges of the pickups only. K&K Sound calls this the "Katamaran" mounting technique. Using this technique, the center portion of the pickup is free-floating, enhancing response while reducing the adhesive surface by about 40%, and therefore having only very little effect on the acoustic sound of the instrument.

The Banjo Twin system is equipped with a multi-use endpin jack. This jack can be mounted three ways: on the outside of the banjo (see photo), or mounted with internal drill through installation, or installed in a slot of the outer rim. For the external-mount, the jack is attached with pu1.html's self-adhesive dual-lock system (similar to Velcro but much stronger). It can be indefinitely opened and closed without wear and tear and guarantees super holding power with absolutely no mechanical noise. This way, the jack can be temporarily removed to fit your instrument into a form-case.

Cable length: 10"; Pickup size: 27mm diameter; Impedance: High ohmic; Jack: 1/4" Stereo TRS endpin jack wired mono.

K&K Big Twin Musical Instrument Transducer (Pickup)

This two-headed transducer system is for larger instruments with heavier bodies, like harp, mandobass, dulcimer, and sitar...

Hot Harmonica Musical Instrument Pickup

A piezo transducer is a good way to pick up a harmonica's sound in spite of the fact that it is a wind instrument.

Mandolin Twin Musical Instrument Pickup (Internal and Fusion models)

The Mandolin Twin Internal and Fusion pickups reproduce the original mandolin tone with very natural tone quality without feedback problems...